Home arrow Products arrow Access Products arrow Card-Type Detectors arrow J Series:
J Series:

The Model J detector is a PC Board type vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A&E's vehicle detectors.
  • Single channel
  • Dual relay outputs
  • Eight external DIP switches
  • Eight position rotary switch
  • Dual relay outputs:
    • Output A:
      • True PresenceTM
      • Limited Presence
    • Output B:
      • Presence (Duplicates Output A)
      • Pulse-on-Entry
      • Pulse-on-Exit
      • Fail Output
  • Output A selectable for Fail-Safe or Fail-Secure operation
  • Delay Outputs A & B for two seconds
  • Eight levels of sensitivity selectable using rotary switch
  • Sensitivity Boost for gate operation where high-bed vehicles might be encountered
  • Detect Memory feature maintains detection during momentary power interruptions for up to two seconds
  • Fail LED indicates current loop failures or loop failures that have occurred
  • Four loop frequencies selectable using DIP switches
  • Super bright LED indicators for power, loop fail and detect/delay
  • 10-pin female or 10-pin mail Molex connector
  • Fail-Safe and Fail-Secure versions available.
  • 4.14" High x 2.71" Wide x .71" Deep

Ordering information:

Model J-yy-w-z

yy = 12: 12 VDC input power
24: 24 VDC input power
Intentionally Left Blank
w= M: Male Connector
F: Female Connector
E: Euro Connector
Intentionally Left Blank
z = Blank: Fail-Safe
S: Fail-Secure
Intentionally Left Blank

 
< Prev   Next >