Home arrow Products arrow Access Products arrow Card-Type Detectors arrow H1 Series:
H1 Series:

The Model H1 is a direct replacement for the Model H. Although the Model H1 has enhanced features, it is plug-in compatible with existing Model H installations. H1 detectors are full featured and in a compact package.
  • Single channel
  • Three solid-state outputs
  • Low Power version available (current draw 4 milliamps)
  • May be used with HM1 series motherboard
  • 3 solid-state (FET) outputs:
    • Presence (Output A)
    • Presence, pulse-on-entry or pulse-on-exit (Output B)
    • Fail output
  • Output A selectable for Fail-Safe or Fail-Secure operation
  • Delay Outputs A & B for 0, 2, 5, or 10 seconds
  • Extend Outputs A & B (when in presence) for 0, 2, 5, or 10 seconds
  • Eight levels of sensitivity selectable using rotary switch
  • Sensitivity Boost for gate operation where high-bed vehicles might be encountered
  • Detect Memory feature maintains detection during momentary power interruptions for up to two seconds
  • Fail LED indicates current loop failures or loop failures that have occurred
  • Four loop frequencies selectable using DIP switches
  • Super bright LED indicators for loop fail and detect/delay
  • 10-pin female or 10-pin mail Molex connector
  • 2.50" High x 2.75" Wide x .85" Deep

Ordering information:

Model H1-yy-w

yy = 12: 12 VDC input power
LP: Low Power
Intentionally Left Blank
w = M: Male Connector
F: Female Connector
E: Euro Connector
Intentionally Left Blank

 
Next >