Home arrow Products arrow Access Products arrow Box-Type Detectors arrow B Series:
B Series:

The Model B is a single channel vehicle detector with two relay outputs.
  • Front Panel mounted pushbutton switch
  • Detector functions are set with internal DIP swtiches
  • Delay Relay Outputs:
    • Output A:
      • Limited Presence
      • True Presence TM
    • Output B:
      • Presence (Duplicates Output A)
      • Pulse-on-Entry
      • Pulse-on-Exit
  • Delay Outputs A & B for two seconds
  • Eight levels of sensitivity selectable from PCB mounted DIP switches
  • No external DIP switches
  • Sensitivity Boost for applications where high-bed vehicles might be encountered
  • Detect Memory feature maintains detection during momentary power interruptions of up to two seconds
  • Fail LED indicates current loop failures or loop failures that have occurred
  • Four loop frequencies selectable from the front panel
  • Loop Fail Memory stores a record of the last loop failure
  • Super bright LED indicators for power, detect, loop fail, and frequency setting
  • 11-pin Amphenol or 10-pin MS connector
  • Fail-Safe or Fail-Secure versions available
  • 3.00" High x 1.75" Wide x 4.30" Deep (11-Pin)
  • 2.90" High x 1.60" Wide x 4.96" Deep (10-Pin)

Ordering information:

Model B-yy-xx-z

yy = 1 or 3: 120 VAC (B-1: 10-Pin, B-3: 11-Pin)
4 or 5: 10-35 V AC/DC Input Power (B-4: 11-Pin, B-5: 10-Pin)
8 or 35: 240 VAC Input Power (B-8: 11-Pin, B-35: 10-Pin)
Intentionally Left Blank
xx = Blank: Internal DIP Switches set to Relay B Pulse-on-Entry
DP: Internal DIP Switches set to Relay B Presence Mode
Intentionally Left Blank
z = Blank: Fail-Safe
S: Fail-Secure
Intentionally Left Blank
11-Pin Amphenol connector requires 802 series harness or SKT-11 relay socket base.
10-Pin MS connector requires 801 series harness.
Intentionally Left Blank
 
< Prev   Next >