|
The E/2-1500 detector is a four channel card rack loop detector with an easy to ready LCD screen and individual channel detect and fail indications provided via four high intensity red LEDs. The E/2-1500 offers advanced features providing built-in diagnostic capabilities viewable on the LCD screen. These include: 1) loop frequency, 2) loop inductance, 3) loop inductance change 4) a bargraph indication of relative inductance change, and 5) accumulated number of loop failures.
- Designed with fast response times for use in speed and occupancy applications
- Low power - LEDs and LCD backlighting are extinguished during normal operation
- Audible detect (buzzer) helps in verifying vehicles passing over loop(s)
|
|
|
Read more...
|
|
|
The C series detectors are two channel detectors with full featured LCD interface.
- NEMA TS1/TS2 or Type 332/170 versions available
- Patented Audible Detect Signal on all versions
- TrueCountTM versions available
- Directional Logic capability
|
|
|
Read more...
|
|
|
The E series detectors are four channel detectors with full featured LCD interface.
- NEMA TS1/TS2 or Type 332/170 versions available
- Patented Audible Detect Signal on all versions.
- Directional Logic capability
- Model E/2 available with single width (1.12” wide) faceplate
|
|
|
Read more...
|
|
|
The 222 series detectors are two channel detectors with DIP switch user interface.
- Caltrans approved
- Type 332/170 compatible
- Patented Audible Detect Signal on all versions.
|
|
|
Read more...
|
|
|
The 222S series detectors are two channel detectors with DIP switch user interface.
- Type 332/170 compatible
- Front panel Call/Test switch simulates Call output
- Patented Audible Detect Signal on all versions.
|
|
|
Read more...
|
|
|
The G series detectors are two channel detectors with DIP switch user interface.
- NEMA TS1/TS2 compatible
- Patented Audible Detect Signal on all versions.
|
|
|
Read more...
|
|
|
The GT series detectors are two channel detectors with DIP switch user interface.
- NEMA TS1/TS2 compatible
- Patented Audible Detect Signal on all versions.
- CALL delay & CALL extension
|
|
|
Read more...
|
|
|
The Y series detectors are four channel detectors with DIP switch user interface.
- NEMA TS1/TS2 compatible
- Patented Audible Detect Signal on all versions.
- Model Y/2 available with single width (1.12” wide) faceplate
|
|
|
Read more...
|
|
|
Products 
))
))
))
))
))
))
))
))